How do I deal with a Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3 error?

47 viewsPhone
0 Comments

How do I deal with a Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3 error?

I’ve recently run into a significant issue with my Samsung S7 Edge, and I’m not sure how to proceed. When I try to access my device, it shows an FRP (Factory Reset Protection) lock, making it impossible for me to use the phone. Moreover, there’s an additional complication: I keep encountering a message that says ‘SW REV. check fail Device:4, Binary:3’. This error has left me puzzled and unable to bypass the FRP lock. It seems related to a software or firmware compatibility issue, but I’m uncertain about the specifics. Has anyone experienced this problem? If so, what steps did you take to understand or fix this situation? Any insights or shared experiences would be immensely helpful.

0

5 Answers

0 Comments

Having dealt with the ‘Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3’ issue, here’s how I approached finding a solution:

  1. Soft Reset: Initially, I tried soft resetting the device. This didn’t fix the problem but is worth trying.
  2. Frija Tool: I used the Frija tool to download the correct firmware instead of relying on other sources, ensuring I had the exact match for my device model.
  3. Using a Professional Service: Finally, after some trials and errors, I decided to use a professional mobile repair service. They flashed the correct firmware and bypassed the FRP lock securely.

Choosing this route ensures a safer handling of the software, especially for complex issues like binary mismatches.

0
0 Comments

When I faced the ‘Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3’ error, I tried a different approach:

  • Check Firmware Compatibility: Sometimes, firmware issues arise due to compatibility errors between the device’s bootloader version and the binary version. Verify the firmware versions and make sure they match.
  • Contact Samsung Support: Given the technical nature of the error, I reached out to Samsung support for assistance. They provided detailed instructions tailored to my device’s configuration.
  • Visit an Authorized Service Center: The support team suggested visiting an authorized service center. They reinstalled the software, ensuring all FRP locks and error messages were removed.

This method involved less DIY and more professional support, especially beneficial if you’re not comfortable with manual updates.

0
0 Comments

I encountered the same ‘Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3’ error and here’s how I fixed it:

  • Factory Reset: I performed a factory reset from the recovery mode to erase any potential corrupted software causing the issue.
  • Utilize Samsung’s Smart Switch: This software not only backs up your data but can also help in device initialization and firmware installation.
  • Re-flash Bootloader and Modem Files: Sometimes, re-flashing only the bootloader and modem files instead of the entire firmware can align everything correctly, fixing the SW REV error.

These methods require some familiarity with device handling and flashing firmware, so proceed with caution.

0
0 Comments

Hey! I recently found myself in a similar situation with my Samsung S7 Edge. To resolve the ‘Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3’ issue, I had to follow a few detailed steps:

  1. Download Odin Tool: First, I downloaded the Odin tool, which is software used to flash firmware on Samsung devices.
  2. Obtain the Latest Firmware: You need to download the correct firmware for your specific Samsung S7 Edge model. Make sure it’s the latest version and appropriate for your device’s region.
  3. Enter Download Mode: Turn off your phone and press the Volume Down, Home, and Power buttons simultaneously. When the warning screen appears, press the Volume Up button to enter Download Mode.
  4. Connect to PC: Connect your phone to your computer using a USB cable. Open Odin on your PC.
  5. Add Firmware to Odin: In Odin, click on the ‘AP’ button and add the firmware file you downloaded.
  6. Start the Flashing Process: Ensure that the ‘Auto Reboot’ and ‘F. Reset Time’ options are ticked in Odin. Then, click the ‘Start’ button to initiate the flashing process.
  7. Wait for Completion: The process might take a few minutes. Your phone should reboot automatically once the flashing is done.
    Following these steps resolved the firmware mismatch, and I was able to bypass the FRP lock.
0
0 Comments

For anyone facing the bothersome ‘Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3’ problem, here’s a solution I found effective:

  1. Preparation: Download necessary tools: Odin, Samsung USB drivers, and the correct firmware for your device.
  2. Install USB Drivers: Before starting, install Samsung USB drivers on your PC to ensure proper communication between your device and the computer.
  3. Odin Setup:
  4. Launch Odin as an Administrator.
  5. Add the downloaded firmware to Odin’s AP section.
  6. Essential Options: In Odin, the ‘Auto Reboot’ and ‘F. Reset Time’ options are essential. Ensure they are checked.
  7. Flash the Firmware:
  8. Connect the device in Download Mode.
  9. Initiate the flashing process by clicking the ‘Start’ button.

This resolved the apparent software compatibility issues, leaving my device functional and user-ready again.

These varied answers provide diverse perspectives and methods to handle the ‘Samsung S7 Edge FRP Locked&SW REV. check fail Device:4, Binary:3’ issue, catering to different levels of expertise and comfort with technical solutions.

0