My mobile fell down in water? What to do next?

My mobile fell into water, and here’s what I did:

1. Quickly take it out and turn it off.
2. Pat it dry with a towel and shake out excess water.
3. Disassemble components, if possible.
4. Place in an airtight container with rice or silica gel packets.
5. Wait at least 48 hours before trying to turn it back on.

For my phone that got wet, here’s how I handled it:

1. I grabbed my phone from the water and powered it down right away.
2. Then I disassembled what parts I could, like the case and SIM card.
3. Using a soft towel, I dried the exterior.
4. While many suggest rice, I opted for silica gel packs in a sealable bag.
5. I left it drying for at least a day before trying to turn it on.
6. Luckily, it worked perfectly after this careful approach.

Here’s what I did when my phone took a plunge:

1. Quick Action: Grab the phone from the water immediately.
2. Turn Off Phone: Turn off the phone to prevent short-circuiting.
3. Remove and Dry Components: Take out the SIM card, SD card, battery, and gently dry all of them.
4. Dry the Phone: Use a soft microfiber cloth to wipe down the device.
5. Use Desiccants: Place the phone in an airtight container filled with silica gel packets.
6. Wait Patiently: Leave it for a couple of days.

If your mobile fell down in water, here are the steps I took to rescue my device:

1. Retrieve the Phone Quickly: Without wasting any time, I grabbed my phone from the water to minimize the duration of exposure.
2. Turn It Off Immediately: I powered off the phone instantly to prevent any short circuits.
3. Remove Accessories: I took out the SIM card, SD card, and any external accessories to halt further damage.
4. Dry the Exterior: Using a soft cloth, I gently dried the phone’s exterior to remove the visible water.
5. Place It in Rice: Placing the phone in a bag of uncooked rice, I made sure it was entirely covered to absorb any moisture.
6. Wait for 48 Hours: This was the hardest part, but I left the phone in rice for at least 48 hours for thorough drying before turning it back on.

When my phone took an unexpected dip, I:

1. Quickly retrieved it and turned it off to prevent a short circuit.
2. Removed the case and dried the phone using a lint-free cloth.
3. Put the phone in a bowl of rice, ensuring it was fully covered.
4. Waited a full 72 hours before trying to power it back on.
5. After the wait, I found the phone functioning normally.

When my phone slipped into the water, I took these steps:

1. Get the phone out of the water immediately and shut it off.
2. Remove the battery, SIM card, and microSD card.
3. Dab the phone dry with a soft cloth.
4. Immerse it in a bowl of uncooked rice and leave it for 24-48 hours.
5. After waiting, reassemble the phone and power it on.

When my phone fell in the water, I followed these steps:

1. Retrieve the phone and power it off instantly.
2. Remove any cases and exterior accessories.
3. Wipe the outside of the phone dry.
4. Use a desiccant, like rice or silica gel, to draw out moisture.
5. Avoid using a hairdryer as heat can damage internal components.

From my experience when my phone went for a swim, these steps helped me:

1. Retrieve and Power Down: Remove the phone from the water instantly and turn it off.
2. Dry External Surface: Using a lint-free cloth, dry the exterior of the phone.
3. Disassemble Components: Remove all cases, SIM cards, external storage, and even the battery if you can.
4. Use Compressed Air: Carefully, I used compressed air to blow water out of the small crevices.
5. Place in a Dry Environment: I put the phone in an airtight container with silica gel packs.
6. Time and Patience: I left it there for at least 72 hours to ensure no moisture remains.

Here’s what I did when my phone fell in water:

1. Pulled the phone out as fast as I could and powered it down.
2. Removed all removable components, like the case, SIM card, and microSD card.
3. Dried the phone using a dry, soft cloth and left it in a bowl of rice for two days.
4. After 48 hours, I tried turning it on, and to my relief, it worked.

When my mobile fell in water, here’s what I did to try and fix it:

1. Immediate Retrieval: I quickly took my phone out of the water source to limit water intrusion.
2. Power Down: Switching off the device was my next step to avoid potential internal damage.
3. Disassemble: I removed the battery (if applicable), SIM card, and any peripherals.
4. Dry Thoroughly: I patted the phone dry using tissues and a cotton towel.
5. Vacuum Cleaner: Carefully, I used a handheld vacuum cleaner to draw out water from the phone’s openings.
6. Absorb Moisture: I then placed it in a desiccant pouch (silica gel packets) to absorb any residual moisture.
7. Patience: I let it sit for 24-48 hours before reassembling and testing the phone.