What should I do if I dropped my iPad and now the display is green?

Here’s what worked for me:
I had the same problem after my iPad fell. The green screen was incredibly annoying. I followed these steps:
1. Check for Software Issues: I first checked if it was a software issue by updating the iOS to the latest version.
2. Inspect Physical Damage: Then, I thoroughly checked for any signs of physical damage or cracks that might indicate internal display issues.
3. Try Safe Mode: I entered Safe Mode to see if the issue persisted. If it didn’t, I knew it was a software problem; if it did, it was likely hardware.
4. Professional Inspection: In the end, it turned out to be a hardware issue, and I had to take it to a repair shop where they fixed the display for me.

I had a similar issue with my iPad recently. When I dropped it, the screen turned green too. Here’s what I did:
1. Check for Obvious Damage: First, I inspected the iPad’s body for any noticeable cracks or damage that might suggest internal issues.
2. Restart the Device: I tried the basic troubleshooting step of restarting the iPad by holding down the power button until the “slide to power off” appeared, then turning it back on.
3. Hard Reset: I performed a hard reset by pressing and holding both the Home button and the power button simultaneously until the Apple logo appeared.
4. Connect to iTunes: I connected my iPad to my computer, launched iTunes, and checked for any updates or restoration options.
5. Visit an Apple Store: When none of these steps resolved the green screen, I decided to book an appointment at the Apple Store. The technicians there performed a diagnostic and concluded that the display needed to be replaced.

I understand how worrying it can be when your iPad’s display turns green. Here’s what I did:
1. Initial Troubleshooting: I started with a force restart by pressing the Home button and Power button until the Apple logo showed up.
2. Inspect for Damage: Noticing no external damage, I suspected internal harm.
3. Community Forums: I visited several online forums where others shared similar experiences. Many suggested it could be an issue with the screen connection becoming loose.
4. Technical Support: Finally, I reached out to Apple Support. They guided me through troubleshooting steps and eventually advised that my iPad needed professional repairs.

When I faced a similar problem, I found that the issue was often related to the hardware inside the iPad. Based on my experience, here are a few steps you can take:
1. Backup Your Data: Before you do anything else, ensure your data is safe. Connect your iPad to a computer and back up your data through iTunes or iCloud.
2. Update Software: Sometimes, updating to the latest iOS can resolve software glitches causing the display issue. Check for any updates in the Settings.
3. Gently Tap: I gently tapped the back of my iPad a few times, and the green tint disappeared momentarily, indicating a loose connection inside.
4. Seek Professional Help: In my case, these steps didn’t fix the green screen permanently, so I took my iPad to a certified repair technician who fixed the internal connections and replaced parts if necessary.

I know how frustrating this can be. Here’s my advice based on what worked for me:
When I experienced a similar issue, I found that the internal LCD connection had come loose. If you feel comfortable with small electronics, you can try this:
1. Power Down: Turn off your iPad completely.
2. Open the iPad: Carefully use a suction cup or a plastic prying tool to lift the screen. Be gentle to avoid further damage.
3. Check Connections: Locate the LCD connector (it’s typically near the side). If it’s loose, gently press it back into place.
4. Close and Test: Carefully replace the screen and ensure it’s secure. Turn your iPad back on and check if the green tint has disappeared.
If you’re not comfortable doing this yourself, I recommend taking it to a professional who can handle the repair safely.