Why does my iPad won’t charge or turn on after battery change?

!! Ensure your new battery matches your iPad’s model and specifications exactly. In my case, mismatched specs caused an incompatibility issue. !! Try a different charging cable and adapter to rule out any charger-related problems. !! Perform a hard reset by holding both the Home and Power buttons for about 10 seconds. !! Open the iPad again to confirm that all the flex cables and connectors are properly seated. !! Check for any possible damage to the motherboard, as this could prevent charging or turning on.

After facing the same issue, I realized it could be due to several reasons, and here’s what worked for me: Ensure Proper Battery Installation: Sometimes, the battery isn’t seated correctly. I had to open the iPad again to make sure the battery connections were tight. Software Glitch: I connected my iPad to my computer while holding the Home and Power buttons, which prompted iTunes to recognize my device and allowed me to restore it. Direct Power Source: Instead of using a USB port from my laptop, I used a wall charger which provided more consistent power and allowed the iPad to charge.

One of the key things I did was take a deep breath and systematically troubleshoot the issue: Visual Inspection: I closely examined the internals to ensure no connectors were accidentally left unconnected or improperly reattached. Battery Quality: I double-checked the quality and specifications of the battery I purchased, as substandard batteries can lead to malfunctioning. Attempting a Hard Reset: By holding down the Home button and the Power button at the same time for about 15 seconds, I managed to reset the system. Different Power Source: Switching from charging via a computer USB to a dedicated wall charger with higher amperage sometimes kick-starts charging. Software Issues: On connecting to iTunes (if a computer recognizes it), it sometimes can prompt to restore or recover the device, helping to fix the underlying issue.

Double-check all connections: Make sure that all the internal connections you unplugged during the battery change are securely reattached. Loose connections can cause the iPad to not power on or charge. Use a different charger: Sometimes, the problem isn’t with your iPad but with the charger. Try a different charging cable and adapter to ensure that’s not the root cause. Reset the iPad: Perform a hard reset by holding the Home and Power buttons simultaneously for at least 10 seconds. This can help to restart the system after a battery replacement. Inspect the new battery: Not all replacement batteries are of high quality. Make sure the battery you installed is compatible with your iPad model and came from a reliable source. Check for physical damage: Look for any signs of damage that may have occurred during the battery replacement, including the PRAM battery or any connectors.

The situation is incredibly frustrating, and I totally understand. It’s clear there could be a number of reasons for your iPad not to charge or turn on. Here’s what I discovered from my own experience, which might help unravel the situation: Connection Issues: Even a slightly loose connection can cause the iPad to stay off. If possible, reopen the iPad and meticulously check each connector. Battery Authenticity: The new battery must be genuine or a highly reliable third-party product meeting your iPad’s specifications. Faulty batteries, even if new, can be DOA (Dead On Arrival). Force Restart: Hold down the Home button and the Power button together until the Apple logo appears. This sometimes reboots the system. Charge Via Computer: Connect your iPad to a computer using iTunes, and see if it’s recognized. If it is, you might get an option to restore or update which could resolve the issue. Motherboard Check: Inspect the motherboard for any visible damage. Sometimes minor issues can lead to significant problems. Professional Help: If everything else fails, seeking professional repair services might be your best course as they can diagnose and fix intricate hardware issues.